Myths related to Needle Roller Bearings Lubricating?
Needle roller lubricating is important. Lubrication is necessary for the consistent operation and long-term operating life of the needle roller bearings. There are several reasons that make lubrication important. The main reason that makes lubrication important is that it helps to form a film on the contact surfaces. These films are very important for supporting the loads. Hence, the lubricants lead to the prevention of the wear and tear. Also, premature fatigue could be avoided because of lubrication.
Why are lubricants used?
- Lubricants are used to offer additional sealing. The bearing needs to be lubricated in order to support sealing. With the help of grease lubrication, you can get rid of the entry of solid and fluid contamination.
-
When it comes to oil lubrication, it is used to dispel heat
-
Lubrication also helps to protect the material against corrosion
-
Lubricants boost the life of the needle bearings. However, it is important to make sure that you choose the right type of lubricant for the right type of bearing.
-
Lubricants increase the reliability of the needle roller bearing, therefore, it is considered quite important by the industries across the globe.
Here’re the myths related to needle roller bearings lubricating
-
Add grease most of the time, as it purges the lubricant from the seal
Adding grease may not be the best idea to do all the time. It is important to wisely take a decision to add lubrication or grease or not. In case grease is added to the needle roller bearing till the time it purges out of the seal, it might have over filled the bearing. The bearing cavity might be filled more than required.
Extra addition of grease or lubrication can amplify the operating temperature. At the same time, it may also lead to enough pressure that will eventually blow out the seal. Though, in dull or difficult situations, where impurity can smoothly enter the seal, there adding grease might turn out to be useful. However, we have to be careful about the application. Most of the needle roller manufacturer ensure that they choose the right quantity and type of lubricant.
-
Go for any type of grease
There are a large variety of greases in the market. All the greases might be apt for different purposes. Therefore, it is important to use the grease that is perfect for your product. There are a variety of greases in the market and not all of them are apt to be used for everything. Some of the greases may not be perfect as diverse type of thickeners are used. Also, two different type of greases are used, which may not be perfect for each other, then the situation might become a little bad. Thus, make sure that you choose grease as per the needle roller bearing.
Choosing the best lubrication is important for the needle roller bearing. However, it is also important to make sure that you avoid the possible myths to ensure that you make the most of lubrication. Listed above are a few of the top myths.
You may like to read on Top Applications of Needle Roller Bearings
